You appear to be using IE 6 (released Aug. 2001). To take advantage of all of the features on our site, please consider upgrading to a current version of IE.

Planar Blade sconce

Tags: LED

Elegant and simple, the Planar series Blade sconce utilizes the small size and large output of today's LED technology to create a sconce that is less than two inches deep. The acrylic panel features a laser etched optical pattern on both sides to direct light through and out of the mateiral with minimal glare. An integral LED driver is housed in the backplate.

Spec Sheet (PDF) Find a Rep Contact Us

Fixtures

W-122

W: 11" x H: 13" Ext: 1.75"

LED

  • W7
    • Lumens: 640 (delivered)
    • Wattage: 7
  • CCT: 40K
  • CRI: >80
  • L70 @ 50,000 hrs.
  • Dimming options
    • D0:0-10v
    • D1:Triac (Leading Edge)*
    • D2:ELV (Trailing Edge)
Finish Codes:
PT

 

Standard Painted Finishes (PT)

Specify PT(XXX).

White (WHT)
Warm Grey (WMG)
Cool Grey (CLG)
Black (BLK)
Light Gold (LGD)
Medium Gold (MGD)
Light Titanium (LTM)
Medium Titanium (MTM)
Light Silver (LSV)
Medium Silver (MSV)
Deep Silver (DSV)
Light Bronze (LBZ)
Medium Bronze (MBZ)
Deep Bronze (DBZ)
Medium Copper (MCP)
Deep Copper (DCP)
Cream (CRM)
Textured Silver (TSV)
Textured Nickel (TNK)
Deep Gold (DGD)
Bright Copper (BCP)
Aged Copper (ACP)
Textured Copper (TCP)
Light Copper (LCP)
Silverado (SD)
Bronze Crater (BC)
Oil Rubbed Bronze (ORB)

NOTE: Computer monitors do not show colors accurately. These finishes should be used only as a rough guide. Consult with your Manning Representative for actual color samples.

Diffuser Codes: PLG

 

Planar Optical LightGuide (PLG)

Planar Optical LightGuide (PLG)
  1. OAH is standard unless specified.
  2. FINISH: Finish is low VOC thermo-cure powdercoat paint. Specify three digit color suffix with "PT" finish options.
  3. HOUSING: Aluminum extrusion with integral LED board channel, heat sink, and acrylic blade support. Machined aluminum components.
  4. ACRYLIC: Clear 1/8" acrylic panels with laser-etched optical pattern to maximize light output and minimize glare.
  5. MOUNTING: Mounts to a standard octagonal junction box, mounting hardware provided by others.
  6. ETL listed to UL standards for dry and damp locations.
  7. *Surge protection recommended for use with D1 (Triac/Leading Edge) dimming systems.

Some content requires Adobe Acrobat Reader to view.