Manning Lighting Planar Blade sconce W-122

Planar Blade sconce

Tags: LED

Elegant and simple, the Planar series Blade sconce utilizes the small size and large output of today's LED technology to create a sconce that is less than two inches deep. The acrylic panel features a laser etched optical pattern on both sides to direct light through and out of the mateiral with minimal glare. An integral LED driver is housed in the backplate.

Fixtures

W-122

W: 11" x H: 13" Ext: 1.75"

LED

W7
- Lumens: 640 (delivered)
- Wattage: 7
CCT: 40K
CRI: >80
L70 @ 50,000 hrs.
Dimming options
- D0:0-10v
- D1:Triac (Leading Edge)*
- D2:ELV (Trailing Edge)

Downloads

Photometrics for W7

Photos for download

Finishes

Finish Codes:
PT

Standard Painted Finishes (PT)

Specify PT(XXX).

NOTE: Computer monitors do not show colors accurately. These finishes should be used only as a rough guide. Consult with your Manning Representative for actual color samples.

Diffuser Material

Diffuser Codes: PLG

Planar Optical LightGuide (PLG)

Notes

OAH is standard unless specified.
FINISH: Finish is low VOC thermo-cure powdercoat paint. Specify three digit color suffix with "PT" finish options.
HOUSING: Aluminum extrusion with integral LED board channel, heat sink, and acrylic blade support. Machined aluminum components.
ACRYLIC: Clear 1/8" acrylic panels with laser-etched optical pattern to maximize light output and minimize glare.
MOUNTING: Mounts to a standard octagonal junction box, mounting hardware provided by others.
UL & ULc listed for dry and damp locations.
*Surge protection recommended for use with D1 (Triac/Leading Edge) dimming systems.